Hypabond 2: Neoprene Adhesive – Size 250ml & 1L

Item Code: RC13101

From: £11.15 Excl. VAT

Base Material: Polychloroprene Rubber, Synthetic Resin Blend
Cure Time: 15 – 30 minutes
Size: 250ml, 1 litre
Colour: Off-White

Clear
Qty:
FLAT RATE DELIVERY

Product Description

More product information

Hypabond 2: Neoprene Adhesive

Our hypabond 2: neoprene adhesive is a quality, high performance polychloroprene adhesive. Used as either a single or two part adhesive depending on the materials and the bond strengths required. Developed primarily for use with cure 200 curing agent to bond a range of rubbers and rubber coated fabrics (e.g. neoprene, hypalon, natural rubber, etc.) in inflatable constructions such as life rafts, dinghies, high-speed inflatable RIBs, etc. You can also use this product in the production of dry and wet suits for the bonding of rubber or nylon coated fabrics to themselves.

Preparation is Key

We recommend that the surface is clean, dry and free from oil before applying the glue. This will ensure that the glue bonds to the material with maximum efficiency. Abrade surfaces using sandpaper or wire brushing followed by cleaning to remove any grease as it is likely to impair adhesion.

We always recommend taking extra care when mixing the materials. This usually takes 3-4 minutes mixing by hand. After you have mixed the two parts you have roughly 4 hours to apply the adhesive.

Apply a thin, even coat of the mixed adhesive to both substrates and allow to dry thoroughly. When dry, apply a thin coat to both substrates and allow to tack off (15 – 30) minutes depending on conditions. Bring surfaces together and press firmly, finishing with a hand roller to ensure an even pressure.

Shipping and Manufacture

Our hypabond 2: neoprene adhesive is shipped direct to you from our warehouse in Romsey, Hampshire in the United Kingdom. This product is also quality tested by our specialist staff.  This ensures that we can offer you the best quality product possible.

Application:
Adhesive Tool, Gap Filling
Product:
2 Part Adhesive
Material:
Polychloroprene Rubber, Synthetic Resin Blend
Colour:
Off-White
Properties
Base
Cure speed
Viscosity
Solids content
Specific gravity
Values
Polychloroprene Rubber, Synthetic Resin Blend
7 days for max strength
2400 mPas (approx)
22% (approx)
0.85 (approx)

PDFs